| |
|
| |
- 2. REMOVE CARPET COVER THEN REMOVE SCREWS WHERE CIRCLES ARE LOCATED
|
| |
- 3. LOCATION OF STOCK ANTENNA MOTOR
|
| |
- 4. REMOVE ANTENNA RETENTION WITH A SET OF PLIERS (COUNTER CLOCK WISE)
|
| |
- 5. REMOVE ANTENNA MOTOR AND DISCONNECT ALL CABLES ASSOCIATED WITH IT
|
| |
6. PLACE THE BASE OF THE S2K ANTENNA INTO THE HOLE AND POSTION ACCORDINGLY,( I NEEDED TO USE A FLAT HEAD TO PUSH IN THE BASE) BECAREFUL NOT TO SCRATCH THE CAR!!! |
| |
7.
ATTACH THE HEAD PEICE OF THE BASE AS TO THESE ARE TWO SEPERATE PIECES |
| |
8. THIS SHOWS THE ORDER IN WHICH THE ANTENNA WILL BE ASSEMBLED, NOTICE WHERE THE BASE SHOULD GO. |
| |
9. BASICALLY JUST ASSEMBLE THE ANTENNA KIT AS SHOWN IN THE PICTURE NEXT TO IT. (SCREW THE ANTENNA TO THE EXTENSION THEN THE EXTENSION TO THE AMPLIFIER |
 |
10. ATTACH THE MOUNTING BRACKET AND BOLT IT TO THE BOTTOM WHERE THERE IS A BOLT OPENING (FIND A BOLT THAT FITS)
CONNECT THE ANTENNA WIRE TO THE STOCK WIRING, THEN CONNECT THE RED CABLE TO A POWER SOURCE.
|
 |
11. YOU SHOULD NOW BE DONE.
|
 |
